PVC Clear Cement, 1 Pint with Dauber - Central Vacuum Tubing

A full pint of clear PVC cement covers a real installation, not just a repair, welding rigid central vacuum pipe and fittings into permanent joints across an entire rough-in run. The solvent softens the mating PVC surfaces so they fuse together as the cement flashes off, leaving a joint that is chemically one piece rather than two parts held by adhesive.

Because the formula dries clear, joints on exposed or finished sections do not pick up the colored haze that some cements leave behind, which matters on visible runs near an inlet or utility room wall. The dauber built into the lid applies cement straight to the pipe and socket without a separate brush, useful when moving quickly through a stack of joints during a rough-in where dozens of tees, couplings, and inlet fittings all need to be welded before the walls close up.

Rated for 2-inch central vacuum tubing and standard PVC pipe in the same class, this pint size suits a full installation, a multi-inlet extension, or restocking a service van. Use with an appropriate PVC primer for maximum joint strength, and work in a ventilated space since the solvent evaporates quickly and the vapor is stronger in an enclosed attic or crawlspace.

Always follow standard ventilation and handling precautions for solvent cements, and keep the can sealed between uses so the remaining cement does not thicken past a usable consistency before the next joint. Sold as a single can.

• Part: 33409
• Formula: clear PVC solvent cement
• Can size: 1 pint (16 oz), built-in dauber
• Prep: pair with PVC primer for full-strength joints