SEBO Crevice Nozzle for AIRBELT D and E Series — Gray/Black

Squeezing the airflow into a narrow slot is what makes a crevice tool work, and 8066GS is the one cut for SEBO's AIRBELT D and E canisters. Reducing the opening raises the speed of the air passing through it, which is why a tool with a fraction of the frontal area of a floor head can pull grit out of places the floor head would simply pass over.

The tapered tip goes where nothing else will: the gap between a cushion and the frame beneath it, the channel of a sliding door track, the inch behind a radiator bracket, the corner where skirting meets carpet, the runners of a car seat. SEBO lists it at position 28 on the AIRBELT E parts diagram, and it is finished in gray and black to match the rest of the tool set.

Keep an eye on the tip. Crevice nozzles get chipped and split from being driven hard into corners and trodden on when left on the floor, and a cracked mouth loses the concentration of air that gives the tool its bite. A hairline split is enough, because the air takes the easier route through the crack instead of round the end. If the reach is the problem rather than the condition, 1093JV is the 24 in. crevice nozzle, which goes the full depth of a sofa without the cushions being lifted out. The 1496GS radiator brush also mounts on a crevice nozzle, so the two are often bought together.

• Fits: SEBO AIRBELT D1 TURBO and D4 PREMIUM; AIRBELT E1 KOMBI, E2 TURBO and E3 Premium
• Part number: 8066GS
• Colour: gray/black
• Diagram position: 28, AIRBELT E
• Typical use: cushion seams, door tracks, skirting edges, car interiors
• Related part numbers: 1093JV 24 in. crevice nozzle, 1496GS radiator brush which mounts on a crevice nozzle

Genuine SEBO part, dispatched by an authorized dealer and ships in 2–5 business days.