Numatic Charles CVC370-2 We...
$474.99
Product details
Where Henry stays strictly dry, Charles adds wet pickup to the same canister platform, so one machine covers everyday vacuuming and the occasional flooded sink trap or standing water on a hard floor. This is the CVC370-2, finished in blue and cataloged under SKU 915678.
NaceCare rates it at 1200 watts, 1.6 horsepower, moving 95 CFM against 100 inches of water lift into a 4 US gallon polypropylene tank. Dry filtration is measured at 0.50 micron with 98.6 percent efficiency, the cord runs 42 feet on a rewind, and the machine weighs 19 pounds and runs at 61 dB(A). A wet shut-off closes the airway before liquid can reach the motor, which is the feature that decides whether one careless pickup ends a wet/dry machine's life.
Wet and dry work through the same body asks more of seals and hose connections than a dry-only machine, since standing water finds any gap dry air would pass straight over. If suction falls off during dry use after a wet cycle, check the tank seal and hose gaskets before blaming the motor, and let the tank dry fully rather than closing it up damp.
- Model: Charles CVC370-2, SKU 915678
- Motor: 1200 W, 1.6 hp, 95 CFM, 100 in water lift
- Tank: 4 US gallon polypropylene, wet and dry
- Filtration: 0.50 micron at 98.6 percent, dry
- Cord and weight: 42 ft rewind, 19 lb, 61 dB(A)
The A21 standard kit ships with the machine, so the dry tools and the wet pickup hardware arrive together rather than as a second order placed after the first wet job makes the gap obvious. Keep a separate set of bags on hand for dry work as well, since switching modes is only as convenient as having the consumables for both.
