Lindhaus Front & Rear Polyurethane Squeegees for LW44 & LW52 Flexy

This set of front and rear squeegee blades is the polyurethane replacement set for the Lindhaus LW44 Flexy and LW52 Flexy scrubber-driers, supplying both wiping edges the machine uses to dry the floor as it moves. Two blades make up the set, one for the front squeegee position and one for the rear, sized to the wider Flexy chassis rather than the smaller LW30 or LW38 machines.

On a scrubber-drier the squeegee is what turns a wet-cleaned floor into a walkable one. It rides against the floor behind the brush, channeling water and cleaning solution into the suction slot so the surface comes out dry rather than damp. Lindhaus lists this set as polyurethane. Whatever the compound, a squeegee only works while its edge stays straight and unbroken, so run a finger down the full length of each blade when drying performance starts to fall off.

Wear shows up as streaking, spray-back, or a damp trail left behind the machine, the usual sign the blade edge has nicked, hardened, or rounded off. SKU 184720081 weighs about 0.2 kg for the pair and is sized for the LW44 and LW52 Flexy only, check the model on your machine before ordering.

• Fits: Lindhaus LW44 Flexy, LW52 Flexy
• Set: two blades, front and rear squeegee positions
• Material: polyurethane
• Weight: approximately 0.2 kg per set