SEBO ET-1 Power Head Cover with FELIX Print - White

Two things set this shell apart from a plain white one: the FELIX print across the top, and the number itself, 2331WESE. Underneath, it is the same ET-1 cover closing the nozzle over its drive side, with the same clip points and the same screw bosses.

Cracks in a cover almost always begin at a mounting point and spread from there, so it pays to catch one early rather than wait for the shell to work loose in use. A cover that no longer sits down tight lets the head flex, and that flex passes straight into the belt path underneath, which is how a cosmetic split turns into a drive complaint. SEBO draws this part at position 135 in the FELIX diagram, and the swap is a screwdriver job once the head is open. While it is apart, the belt and the bristle strip are both worth a look, because access to either is awkward once everything is closed up again.

• Part number: 2331WESE
• Color and finish: white, with the FELIX name printed on the face
• Fits: SEBO ET-1 power heads, with or without the switch
• Also listed by SEBO for: FELIX Premium
• Diagram position: 135, FELIX parts diagram
• Pack: one cover, no internals supplied
• Distinct from: 2326WEET, the unprinted white shell, and 2331WEAM, the other printed white shell
• Printed shells in other colors: 2360SWSE black, 2330DRSE red, 2361DBSE dark blue, 2333VOSE orange

A shopper looking for a white FELIX Premium power head cover, or for a genuine SEBO ET-1 cover with the FELIX print, wants this number rather than one of the plain shells. Should any of the original fixings be past reuse, SEBO lists them separately, with screw 2.9 x 13 as 0107 and 0107ER for a ten pack. Ships in 2-5 business days.