SEBO Combination Floor Nozzle for AIRBELT and C Series Canisters (Gray/Black)

Carpet in one room and tile in the next usually means stopping to change floor heads. The 8351GS combination nozzle removes that step. A switch on the head lowers a bristle strip for wood, tile and stone and pulls it back up again for rugs and carpet, so one tool stays on the wand from one end of the house to the other.

There is no brush roll inside it and no electrical connection running through the wand, which means nothing to unwind, no belt to slip and no drive to fail: the nozzle works on airflow alone. SEBO fits this head as the standard floor tool on the AIRBELT E1 Kombi and the AIRBELT K2 Kombi, and lists it as an extra head for the rest of the canister range, so it is equally a replacement part and an upgrade for a machine that shipped with a turbo nozzle instead.

Renew it once the bristle strip has worn flat and no longer stands proud of the sole plate, once that sole has picked up enough scoring to mark a finished floor, or once the setting will not stay where it is put and the strip drifts mid-stroke. The compact single-wheel alternative is 6735GS, and 8365AM is the turbo version with a driven roller for carpet.

• Fits: SEBO AIRBELT D1 TURBO, D4 PREMIUM, E1 KOMBI, E2 TURBO, E3 Premium, K2 KOMBI, K2 TURBO and K3 PREMIUM; C1.1, C2.1 and C3.1
• Part number: 8351GS
• Colour: gray/black
• Two positions: bristles down for bare floors, bristles up for carpet and rugs
• Drive: suction only, no brush roll, belt or electrical connection
• Standard equipment on: AIRBELT E1 Kombi and AIRBELT K2 Kombi
• Related part numbers: 6735GS compact combination nozzle, 8365AM turbo floor nozzle, 6391AM parquet brush

Genuine SEBO tooling, so the wand collar seats without play or whistle. Supplied by an authorized dealer and ships in 2–5 business days.