SEBO Hose and Handle Assembly with Dual Controls for AIRBELT E3 Premium

Seven feet of hose, a handle, and the twin controls set into that handle come as one finished assembly under SEBO 8547AM, the replacement run for the AIRBELT E3 Premium. The factory sheet for the AIRBELT E range shows it at position 33, on the row written up as the seven-foot E3 hose with handle.

The assembly does two jobs at the same time, which is why a tired one produces symptoms that look unconnected. It carries the suction path from the machine out to the tube, and it carries the switching for the machine in the controls under your thumb. So the same worn assembly can give you pickup that comes and goes as a split in the tube opens and closes with the bend, a flat spot from being stood on that never fully recovers its bore, and a control that needs a second press. At the far end the telescopic tube 60237UC (position 37, listed as supplied including 60238AD) plugs into the handle; at the near end the hose enters the canister body.

Because it ships complete, there is no cuff to salvage and nothing to transfer from the old run. Two ordering notes. Position 33 is used more than once on the AIRBELT E sheet, retaining ring 6303GS carrying the same number, so match 8547AM rather than the position. And the on/off button for this machine is its own line at position 16, part 8339ER, so a control that has stopped responding is not automatically a hose fault.

• Fitment: SEBO AIRBELT E3 Premium
• Drawn at: position 33 on the AIRBELT E sheet, the seven-foot E3 hose row
• Supplied as: complete hose, handle and dual controls, ready to fit
• Shade: gray black; the AIRBELT E sheet draws body panels in black, dark blue, red and white, while this run is drawn once and is not colour-matched to them
• Related numbers: 60237UC telescopic tube, 8339ER on/off button, 8322AM pre-motor filter box, 8300AM AeraPure filter bags
• Genuine SEBO assembly, ships in 2–5 business days