SEBO ET-1 Power Head Cover ...
$34.00
Product details
A snapped locating tab, a split running out from a screw hole, or a top that no longer sits flush are the usual reasons to order 2326SWET, the black upper shell of the SEBO ET-1 power head. It is supplied plain, with no model name printed across the face, which is exactly what separates it from the printed black shell in the same family.
The cover is the molded top of the nozzle. It clips and screws down over the drive side of the head, holds the housing square, and keeps carpet fibre and grit out of the belt and pulley underneath. SEBO draws it at position 135 on the sheet titled ET 1, ET 2 Power Heads, which is the name of a diagram rather than a fitment list, so order against the number rather than the sheet. A crack that starts at a mounting boss keeps opening under vibration until the head no longer closes flat, and from that point dust works its way onto the belt. Swapping the shell takes minutes with the head already apart, and it is the natural moment to look over the belt and the state of the bristle strip while access is easy.
- Part number: 2326SWET, sold singly
- Color: black, plain molding with no print applied
- Fits: SEBO ET-1 power heads, both the switched and the unswitched builds
- Also listed by SEBO for: AIRBELT D4 PREMIUM and AIRBELT K3 PREMIUM
- Diagram position: 135, SEBO ET 1 / ET 2 power head sheet
- Supplied as: the shell alone, with no internal components
- Other ET-1 shells: 2326WEET in white, 2326VOET in orange, 2360SWSE, the printed black shell, which is a separate number again
If you are hunting a genuine SEBO ET-1 power head cover, or a black nozzle top for an AIRBELT D4 PREMIUM or AIRBELT K3 PREMIUM, this is the number to quote. SEBO catalogs its small hardware separately as well, so a chewed fixing need not hold up the repair: screw 3.9 x 16 is listed as 0103 singly and 0103ER in a ten pack, with locking washers as 0141 and 0141ER. Ships in 2-5 business days.
