SEBO Brush Light Lens, Right Hand, for ET-1 and ET-2 Power Heads

Clear plastic keeps grit off the brush light while letting the beam through, and 2956 is the right hand lens for that duty. It seats in the power head housing over the lamp, taking the scuffs and knocks that come from working tight against baseboards, table legs and stair risers.

SEBO catalogues the right hand lens at position 140 on the ET-1/ET-2 diagram, at 140 on the FELIX sheet and at 137 on the DART, immediately alongside the on/off button lens. Lenses cloud with age and crack on impact, and a hazed lens dims the light long before the lamp behind it gives up, which is why a machine that seems to have lost its brush light often only needs the plastic changed. Wipe out the lamp recess while the lens is off the head, and check the seat for old grit so the new lens sits flush rather than proud.

• Part number: 2956, right hand lens
• Fits: ET-1 and ET-2 power heads, switched and unswitched
• Also listed for: FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 PREMIUM, AIRBELT E3 Premium and AIRBELT K3 PREMIUM
• Diagram positions: 140 on the power head and FELIX sheets, 137 on the DART
• Job: protects and covers the brush light in the head
• Related part numbers: 2957 on/off button lens at 139, 2684ER printed circuit board
• Tip: clean the lamp recess before the new lens goes in

Buyers hunting a SEBO ET-2 brush light lens replacement should note the handing: this is the right hand moulding, and the switch lens on the other side of the head is a separate number entirely. Both sit within one position of each other on the same diagram, so it is easy to order the wrong one from a drawing alone. Genuine SEBO lens supplied through an authorized dealer, shipping in 2–5 business days.