SEBO Left-Hand Bearing Block for ET-1 and ET-2 Power Heads — Gray Black

Position 102 on SEBO's exploded views marks the left-hand brush roll bearing, and 2314GS is that component in gray black, assembled and ready to seat. The same position number applies across the ET 1 / ET 2 power head, DART and FELIX diagrams, so whichever sheet you are working from the reference holds.

Left and right blocks are not interchangeable and carry separate part numbers, so identify which end has gone noisy before ordering. Grinding under load, a roll that will not turn freely by hand, or visible play when you rock the roll in its seat all point at the bearing rather than the belt. The distinction matters because a slipping belt and a failed bearing can both leave a head that cleans poorly on carpet, yet the fix and the part are entirely different. With the roll out, spin each bearing on its own: a healthy one runs on smoothly for a few seconds, a failed one feels notchy or stops immediately, and a housing that has worn oval will let the whole bearing turn in its seat.

Because both ends accumulate identical hours, pairing this with the right-hand block, part 2313GS, avoids taking the head apart twice. Clear wound hair and thread from the roll shaft before reassembly, since that binding is what loads the bearings in the first place, and check the belt runs central on its pulley once everything is back together. Light gray ET-1 heads use the colour-matched block 2314HG instead of this one.

• Fits the SEBO FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium
• Suits ET-1 as well as ET-2 power heads, switched or unswitched
• Part number: 2314GS
• Left-hand brush roll bearing block, supplied complete with the bearing seated
• Finish: gray black
• Diagram position: 102 in the ET 1 / ET 2, DART and FELIX parts lists
• Related numbers: 2313GS right-hand block, 2314HG in light gray

Genuine SEBO part. Ships in 2-5 business days.