SEBO ET-2 Power Head Chassi...
$31.00
Product details
Part 2325GS is the gray black chassis built for the ET-2 head, the moulded base that the motor, roll bearings and wheels all mount into. It is specific to the ET-2, which is the wider of the two power head families, so confirm the head designation on your own machine before ordering rather than matching by outline.
Damage at this level is nearly always physical: a drop down a stair, a crack running out from a screw boss, a wheel mount that no longer holds its position. What sends people looking for a frame is usually a repair that refused to take. Bearings replaced and the roll still runs noisy, a new belt that keeps walking off its pulley, a sole plate that will not pull up flush at one corner. All three trace back to a frame that has lost its geometry, and none of them respond to another round of wear parts. SEBO lists the ET-2 chassis at position 100 in the ET 1 / ET 2 power head diagram.
The frame is supplied on its own, so the motor, bearing blocks, wheels, pulley and height linkage all move across from the old one. Keep the fasteners grouped by location as they come out, and take the opportunity to renew anything already close to the end of its life while access is unusually good. The equivalent frame for the narrower ET-1 head is 2324GS in the same finish, and the light gray ET-1 version is 2324HG. Set the new frame down on a flat surface before building it up and confirm it sits without a rock, which is the simplest check that the replacement is true.
- Fits the SEBO FELIX 2 Premium
- Suits ET-2 power heads built with or without an on/off rocker
- Part number: 2325GS
- Colour: gray black
- Diagram position: 100, ET 1 / ET 2 power head parts list
- Supplied as the bare frame; original internals transfer across
- Carries the motor mounting, bearing seats and wheel locations
- Related number: 2324GS, the ET-1 chassis
Genuine SEBO part. Ships in 2-5 business days.
