SEBO ET-1 Power Head Cover ...
$34.00
Product details
DART machines carry a printed shell of their own, and 2331WEAM is it. SEBO gives the finish its own name in the parts book, arctic white, and prints the DART wordmark across the top face of the ET-1 power head cover.
Position 132 is where it sits in the DART diagram, which is worth noting if you are working from the sheet rather than from the number, since most of the ET-1 covers are drawn at 135 on their own diagrams. The cover itself is the molded upper half of the nozzle, screwed and clipped down over the drive side, sealing the belt and pulley away from the grit the machine is picking up an inch below. Replace it when a corner has broken out, when a fixing point has cracked and the top no longer pulls down tight, or when the printed surface has worn away and the head looks tired next to the rest of the machine. A cover that cannot seat flush lets the housing flex, and that flex ends up in the belt path.
- Part number: 2331WEAM
- Color and finish: arctic white, SEBO's own name for the shade, with the DART print applied
- Fits: the SEBO DART, and ET-1 power heads whether switched or unswitched
- Diagram position: 132, DART parts diagram
- Supplied as: the shell alone, sold singly
- Not included: brush roller, belt, switch or fixings
- Other white shells: 2326WEET in plain white, and 2331WESE, the other printed white version
The print is the only thing separating this from the other white ET-1 covers in the range, and photographs rarely show it clearly, so order by number. Searches for a SEBO DART power head cover replacement, or for a genuine SEBO arctic white ET-1 cover, both point here. If a fixing is beyond reuse, SEBO lists its hardware individually too, with screw 3.9 x 16 as 0103 and 0103ER for a ten pack. Ships in 2-5 business days.
