SEBO Left-Hand Swivel Neck Support for ET-1 and ET-2 Power Heads

Mirror image of part 2311, this brace carries the opposite flank of the neck pivot on ET-1 plus ET-2 floor nozzles. Part 2312 appears at position 124 in the ET 1 / ET 2 power head, DART and FELIX diagrams as the left swivel neck support.

These braces are what stop the pivot twisting out of alignment as the handle is pushed and pulled. A hairline fracture is easy to miss and produces a maddeningly vague fault: loose steering, a rattle from the joint, and nothing visibly wrong until the brace is off the machine and flexed between finger and thumb. What makes it worth pursuing is that the same looseness gets blamed on the neck assembly, which is a far larger job, so ruling the braces out first saves opening the head twice. A support that has failed at its mounting boss will often still sit in position under its screw, which is exactly why a visual check alone is not enough.

Doing both flanks at once is the repair that actually holds, since the two see identical hours and the surviving brace is usually not far behind. The right-hand support is part 2311, and the neck itself is 2307GS in gray black or 2307HG in light gray for ET-1 heads. Fitment covers the SEBO FELIX Premium, FELIX 2 Premium, DART and C3.1 uprights along with the AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium canisters, on ET-1 and ET-2 heads alike. Switch layout makes no difference to the order, because the brace is structural and carries nothing electrical.

• Fits the SEBO FELIX Premium, FELIX 2 Premium, DART, C3.1, AIRBELT D4 Premium, AIRBELT E3 Premium and AIRBELT K3 Premium
• Suits ET-1 as well as ET-2 power heads, switched or unswitched
• Part number: 2312
• Left-hand side
• Diagram position: 124 in the ET 1 / ET 2, DART and FELIX parts lists
• Sold individually; the right-hand support is part 2311
• Keeps the neck pivot aligned under push and pull loads
• Related neck assemblies: 2307GS gray black, 2307HG light gray

Ships in 2-5 business days.