SEBO Power Supply Cord for ...
$41.00
Product details
Cords fail in ordinary, visible ways: a jacket nicked on a doorframe, a flattened length where a chair leg has been parked for a year, a plug that runs warm or will not sit tight in the outlet. The dark gray supply lead SEBO specifies for the DART, the FELIX Premium and the FELIX 2 Premium is ordered as 7127DG.
Nothing else on an upright takes comparable punishment. The lead gets hauled around corners, run over by the machine it belongs to, pulled out of the wall by the cable instead of the plug, and wound onto its hooks while still warm and pulled tight. Damage to insulation is a question of safety, not performance, so exposed conductors, a split plug body or scorching at the pins mean the machine goes out of service that day rather than getting taped up and carried on with. There is a diagnostic reason to change one as well: a lead that conducts only at certain angles is the classic explanation for an upright that seems to die and come back at random, and it is far cheaper to rule out than the electronics behind it.
- Part number: 7127DG
- Listed for: the SEBO DART, the FELIX Premium and the FELIX 2 Premium
- Finish: dark gray
- Replace it when: the outer jacket is cut or worn through, the plug is loose, discolored or scorched, or power comes and goes as the lead is flexed
- Fitting: hard-wired at the machine end, so this is a technician's job and not a plug-in swap
The internal wiring that takes over from it is 7064, listed for the same three uprights and drawn at item 2 of the DART sheet. Storage hooks are separate items in the finish of each machine, at item 15 on the FELIX sheet and item 19 on the DART sheet, so a snapped hook does not have to mean living with a trailing cord.
Genuine SEBO lead supplied by our authorized dealership. Ships in 2-5 business days.
