SEBO Exhaust Microfilter with Textile Layer for FELIX Fun Uprights

Bonded textile backing is what separates this outlet filter from a bare pleated pad. The fabric layer holds the media square in its frame so air passes through the whole face rather than one collapsed corner, and it adds a second capture stage behind the pleats. Part 7095ER01 is the version cut for the FELIX Fun upright.

Anything fine enough to slip past the paper bag and then past the pre-motor filter arrives here, at the outlet, immediately before the air rejoins the room. That is why an element pulled out after a year of service looks grey rather than white, and why a machine can feel tired long before its bag is anywhere near full: the restriction is behind the motor, not in front of it. The FELIX range uses a different exhaust filter number for each finish, so the colour of your machine decides the part as much as the shape does. The Fun takes 7095ER01; the Classic takes 7095ER03, the ice blue takes 7095ER02, the onyx 7095ER04, the white 7095ER11 and the rosso 7095ER12.

• Part number: 7095ER01
• Machine: FELIX Fun upright
• Stage: post-motor outlet filtration, the last stage in the machine
• Media: microfilter with a bonded textile support layer
• Change it when: the face has darkened, or airflow has dropped with a new bag fitted
• Sold: one filter

If the machine has never had this stage changed, expect the element that comes out to be markedly darker than the one going in, and expect the difference in the exhaust to be noticeable on the first pass afterwards. It is a tool-free swap at the outlet housing, which makes it the easiest of the three filtration stages to keep on schedule.

Lift the old element out of its housing and press the replacement home with the textile face turned the same way round, then check the cover closes flush so no air escapes past the frame. A SEBO FELIX Fun exhaust filter, a FELIX outlet microfilter or a post motor filter for the Fun is part 7095ER01. Ships in 2-5 business days.