SEBO Safety Catch Spring fo...
$6.99
Product details
Latch springs fatigue long before the latch body does. When a safety catch on a SEBO upright feels lazy, sits half open, or fails to snap back after it is released, the small steel spring behind it has almost always lost tension rather than broken. SEBO 5091 is that spring, sold as the single replacement piece, and it is one of the widest-fitting hardware items in the range: it covers the AUTOMATIC X uprights, the ESSENTIAL G uprights and the 370 machines from one number.
SEBO draws it at position 39 in the ESSENTIAL G4/G5 exploded parts diagram, which makes it straightforward to confirm against a workshop drawing before anything is opened up. The failure mode is quiet: nothing snaps, the catch simply stops holding with authority, and a door or cover that used to click shut starts sitting slightly proud. On a bag compartment that means a broken seal and dust finding its way out; on any cover it means a part that can be knocked open in use. Because the spring costs so little, fitting a tired one back into a rebuilt catch is the one thing not worth doing.
- SEBO part number 5091, safety catch spring, single piece
- Material: steel wire spring
- Fits the SEBO AUTOMATIC X1, X2, X4, X4 Boost, X5, X7 Premium, X7 Pet and X8
- Fits the SEBO ESSENTIAL G1, G2, G4 and G5
- Fits the SEBO 370 COMFORT and ELECTRONIC 370
- Diagram position 39 in the ESSENTIAL G4/G5 parts drawing
- The catch this spring drives is SEBO 5360; nearby bag compartment numbers are 5083 locking rod, 5084 locking rod spring and 5324 bag holder
- Genuine SEBO hardware supplied by an authorized dealer; ships in 2-5 business days
Order two if the machine is coming apart properly, since a spring this size disappears the moment it is dropped. People arrive at this listing searching for a SEBO safety catch spring, an Automatic X catch spring replacement or plain genuine SEBO 5091, and all three are this part.
